How to Replace a SAAB Key Fob
Dealers could charge you several hundred dollars for keys that aren't working properly. But you can repair it yourself for much less.
You'll require a small flathead screwdriver to split the case open and get at the electronics inside. It is also recommended to have a multimeter available to test the battery.
Battery
Most key fobs activate when you press the button to unlock or lock your car (or start it if you have a keyless ignition). This is because they use batteries inside, which sends an electronic signal to the vehicle to inform it that you are close enough to activate the starter button. If your starter device starts to act inconsistently it is likely the battery has deteriorated and must be replaced.
It's a relatively simple process, but be careful to not damage the electronics inside the fob. If you're not sure what size battery your fob requires, look for a sticker or other marking on the side of the key fob that will indicate what it requires. You can use a multimeter in order to test your old battery and verify that it is working.
Remove the battery that was in use and replace it with the new one after you've found the correct one for your key fob. Then you can snap the two parts of the fob back together and you'll be ready to go. Buy a few extras batteries so that you'll have them to replace the battery if the key fob goes out or damaged. You'll not have to replace the whole key fob in future.
Electronics
Key fobs that lock and unlock your car remotely use a battery. It's not uncommon for the battery fail or the electronic components of the key fob wear out depending on how frequently you use it. It's important to replace your SAAB key fob battery as soon as you can in order to stop it from locking and unlocking your car in error.
It's relatively simple to change the battery or electronic components of the SAAB keyfob. It doesn't require any special tools or equipment, and you could do it at home if you are able to do it. However, it's important to be cautious when taking the electronics from the case of your SAAB key fob as they can be damaged if you push them too to hard.
Owners of SAAB 9-3 vehicles usually lose their primary key. It can cost a significant amount of money to acquire replacement keys from a dealer, and you may have to wait for weeks for the keys to arrive. Our Oakland mobile SAAB locksmith can cut keys for you using a Toyota key and program it into your immobilizer for a fraction of the cost.
A new Toyota key costs around $120 which is a tiny fraction of the price charged by dealers. You will also save on the cost of towing your car to the dealer and the time you'll spend waiting for them to complete the job.
Reprogramming
You may have to replace your manual key. This is a very simple procedure that doesn't require any special tools. Insert a flathead into the slot that is in the middle of your case. Gently work the case open and you'll be able take out the old key fob. The battery and electronics are simple to take out, but you'll need to be cautious not to damage the plastic.
It was the case that it was not surprising that you could steal your neighbor's Volkswagen Golf 2. Today, however automobiles are using advanced technology to make them more difficult to hack. This isn't because of the metal part of the keys for cars but to the electronic chip inside them. It's a smart idea to keep an extra key fob, or to reprogramme a key fob that is a saab.
The cost to reprogramme the key fob can be a bit expensive depending on the year of your vehicle model, make, and year of the vehicle. To get a precise estimate it is recommended that you contact an area locksmith and give them the year, make, and model of your vehicle. This will allow you to determine whether the cost is worth the cost. It's also an excellent idea to purchase an emergency key in the event that you lose one of your other keys. It will save you a lot of time in the future.
The manual key is removed.
All modern key fobs whether used as car keys or to start the car with a push-button, have backup keys within. This allows them to be used as a physical key in case the electronics of your fob fail or become damaged. If you own one of these keyfobs and notice that it's not unlocking your vehicle as easily or sending a signal to your car that informs you when you press the start button your backup key might be failing.
There are saab ignition key replacement that can be made to help with this problem, but in the long run, you'll want to have the battery replaced as soon as you can. YouTube videos will guide you through the easy procedure of replacing a car keyfob battery.
Depending on the type of damage your fob has been through, you may need to replace parts or carry out other more extensive work to get it back in working order. This could be due to a cracked or oxidized circuit board, or tiny electronic components that are not fully attached to it. If you're worried about the cost of fixing or replacing your key fob for the Saab, you can ask your mechanic for suggestions for the most cost-effective solution for the issue.